100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 301-310

By on October 7, 2015
Ensurepass     QUESTION 301 Which VTP mode is capable of creating only local VLANs and does not synchronize with other switches in the VTP domain?   A.       client B.       dynamic C.       server D.       static E.        transparent   Correct Answer: E     QUESTION 302 A switch is configured with all ports assigned Read more [...]

Continue Reading

100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 291-300

By on
Ensurepassstyle="cursor: auto; line-height: normal">   QUESTION 291 A network administrator is explaining VTP configuration to a new technician. What should the network administrator tell the new technician about VTP configuration? (Choose three.)   A.       A switch in the VTP client mode cannot update its local VLAN database. B.       A trunk link must be configured between the switches to forward VTP updates. C.       Read more [...]

Continue Reading

100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 261-270

By on
Ensurepass   QUESTION 261 Refer to the exhibit. The output that is shown is generated at a switch. Which three of these statements are true? (Choose three.)     A.       All ports will be in a state of discarding, learning or forwarding. B.       Thirty VLANs have been configured on this switch. C.       The bridge priority is lower than the default value for spanning tree. D.       Read more [...]

Continue Reading

100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 271-280

By on
Ensurepass  QUESTION 271 Which IEEE standard protocol is initiated as a result of successful DTP completion in a switch over FastEthernet?   A.       802.3ad B.       802.1w C.       802.1Q D.       802.1d   Correct Answer: C     QUESTION 272 Which command enhances the 802.1D convergence time on ports that are connected to hosts?   A.       Read more [...]

Continue Reading

100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 251-260

By on
Ensurepass="cursor: auto; margin: 0cm 0cm 0pt; line-height: normal" align="left">  QUESTION 251 A Catalyst 2950 needs to be reconfigured. What steps will ensure that the old configuration is erased? (Choose three.)   A.        Erase flash. B.        Restart the switch. C.        Delete the VLAN database. D.        Erase the running configuration. E.         Read more [...]

Continue Reading

100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 231-240

By on
Ensurepass   QUESTION 231 A network administrator is troubleshooting the OSPF configuration of routers R1 and R2. The routers cannot establish an adjacency relationship on their common Ethernet link. The graphic shows the output of the show ip ospf interface e0 command for routers R1 and R2. Based on the information in the graphic, what is the cause of this problem?     A.        The OSPF area is not configured properly. B.        Read more [...]

Continue Reading

100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 241-250

By on
Ensurepass  QUESTION 241 Which switch would STP choose to become the root bridge in the selection process?   A.        32768: 11-22-33-44-55-66 B.        32768: 22-33-44-55-66-77 C.        32769: 11-22-33-44-55-65 D.        32769: 22-33-44-55-66-78   Correct Answer: A     QUESTION 242 A company implements video conferencing over IP on Read more [...]

Continue Reading

100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 221-230

By on
Ensurepass="cursor: auto; margin: 0cm 0cm 0pt; line-height: normal" align="left">  QUESTION 221 Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0? (Choose two)   A.        Router(config)#router ospf 1 B.        Router(config)#router ospf 0 C.        Router(config)#router ospf area 0 D.        Read more [...]

Continue Reading

100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 211-220

By on
Ensurepass  QUESTION 211 A router has learned three possible routes that could be used to reach a destination network. One route is from EIGRP and has a composite metric of 20514560. Another route is from OSPF with a metric of 782. The last is from RIPv2 and has a metric of 4. Which route or routes will the router install in the routing table?   A.       the OSPF route B.       the EIGRP route C.       Read more [...]

Continue Reading

100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 201-210

By on
Ensurepass  QUESTION 201 OSPF routing uses the concept of areas. What are the characteristics of OSPF areas? (Choose three.)   A.       Each OSPF area requires a loopback interface to be configured. B.       Areas may be assigned any number from 0 to 65535. C.       Area 0 is called the backbone area. D.       Hierarchical OSPF networks do not require multiple areas. E.        Read more [...]

Continue Reading

100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 191-200

By on
Ensurepass   QUESTION 191 Which of the following are true regarding the debug output shown in the graphic? (Choose Two)     A.     This router was configured with the commands: RtrA(config)#router rip RtrA(config-router)#version 2 RtrA(config-router)#network 172.16.0.0 RtrA(config-router)#network 10.0.0.0   B.     This router was configured with the commands: RtrA(config)#router rip RtrA(config-router)#network 172.16.0.0 RtrA(config-router)#network Read more [...]

Continue Reading

100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 171-180

By on
Ensurepass  QUESTION 171 Use the output from the router shown in the graphic above to determine which of the following are correct. (Choose two.)     A.        Router John uses a link-state routing protocol. B.        Router John will receive routing updates on the Serial0/0 interface. C.        Router John will receive routing updates on the Serial0/1 interface. D.        Read more [...]

Continue Reading

100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 181-190

By on
Ensurepassstyle="cursor: auto; line-height: normal">   QUESTION 181 What is the default routing update period for RIPv2?   A.       15 seconds B.       30 seconds C.       180 seconds D.       240 seconds Correct Answer: B     QUESTION 182 Refer to the exhibit. S0/0 on R1 is configured as a multipoint interface to communicate with R2 and R3 in the hub-and-spoke Read more [...]

Continue Reading

100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 161-170

By on
Ensurepass    QUESTION 161 Refer to the exhibit. The network administrator must establish a route by which London workstations can forward traffic to the Manchester workstations. What is the simplest way to accomplish this?     A.       Configure a dynamic routing protocol on London to advertise all routes to Manchester. B.       Configure a dynamic routing protocol on London to advertise summarized routes to Manchester. Read more [...]

Continue Reading

100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 151-160

By on
Ensurepass="cursor: auto; margin: 0cm 0cm 0pt; line-height: normal" align="left">  QUESTION 151 In the implementation of VLSM techniques on a network using a single Class C IP address, which subnet mask is the most efficient for point-to-point serial links?   A.        255.255.255.240 B.        255.255.255.254 C.        255.255.255.252 D.        255.255.255.0 Read more [...]

Continue Reading

100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 121-130

By on
Ensurepass  QUESTION 121 The ip subnet zero command is not configured on a router. What would be the IP address of Ethernet0/0 using the first available address from the sixth subnet of the network 192.168.8.0/29?   A.        192.168.8.25 B.        192.168.8.41 C.        192.168.8.49 D.        192.168.8.113   Correct Answer: C     QUESTION Read more [...]

Continue Reading

100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 111-120

By on
Ensurepass    QUESTION 111 Refer to the exhibit. Which three statements correctly describe Network Device A? (Choose three.)     A.       With a network wide mask of 255.255.255.128, each interface does not require an IP address. B.       With a network wide mask of 255.255.255.128, each interface does require an IP address on a unique IP subnet. C.       With a network wide mask of 255.255.255.0, Read more [...]

Continue Reading

100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 91-100

By on
Ensurepass="cursor: auto; text-justify: inter-ideograph; margin: 0cm 0cm 0pt; line-height: normal" align="justify">  QUESTION 81 Drag and Drop   Correct Answer:     QUESTION 82 The following commands are entered on the router:   Burbank(config)# enable secret fortress Burbank(config)# line con 0 Burbank(config-line)# login Burbank(config-line)# password n0way1n Burbank(config-line)# exit Burbank(config)# service password-encryption   What is the purpose of the last Read more [...]

Continue Reading

100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 71-80

By on
Ensurepass="cursor: auto; text-justify: inter-ideograph; margin: 0cm 0cm 0pt; line-height: normal" align="justify">  QUESTION 71 What is the best practice when assigning IP addresses in a small office of six hosts?   A.      Use a DHCP server that is located at the headquarters. B.      Use a DHCP server that is located at the branch office. C.      Assign the addresses by using the local CDP protocol. D.      Read more [...]

Continue Reading

100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 81-90

By on
Ensurepass="cursor: auto; text-justify: inter-ideograph; margin: 0cm 0cm 0pt; line-height: normal" align="justify">  QUESTION 81 Drag and Drop   Correct Answer:     QUESTION 82 The following commands are entered on the router:   Burbank(config)# enable secret fortress Burbank(config)# line con 0 Burbank(config-line)# login Burbank(config-line)# password n0way1n Burbank(config-line)# exit Burbank(config)# service password-encryption   What is the purpose of the last Read more [...]

Continue Reading

100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 61-70

By on
Ensurepass  QUESTION 61 The command ip route 192.168.100.160 255.255.255.224 192.168.10.2 was issued on a router. No routing protocols or other static routes are configured on the router. Which statement is true about this command?   A.      The interface with IP address 192.168.10.2 is on this router. B.      The command sets a gateway of last resort for the router. C.      Packets that are destined for host 192.168.100.160 Read more [...]

Continue Reading

100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 51-60

By on
Ensurepass  QUESTION 51 An administrator is working with the 192.168.4.0 network, which has been subnetted with a /26 mask. Which two addresses can be assigned to hosts within the same subnet? (Choose two.)   A.      192.168.4.61 B.      192.168.4.63 C.      192.168.4.67 D.      192.168.4.125 E.       192.168.4.128 F.       192.168.4.132 Read more [...]

Continue Reading

100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 31-40

By on
Ensurepass  QUESTION 31 At which layer of the OSI model does the protocol that provides the information that is displayed by the show cdp neighbors command operate?   A.      application B.      transport C.      network D.      physical E.       data link   Correct Answer: E     QUESTION 32 Which two characteristics apply to Layer 2 switches? Read more [...]

Continue Reading

100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 41-50

By on
Ensurepass  QUESTION 41 Refer to the exhibit. All devices attached to the network are shown. How many collision domains are present in this network?     A.      2 B.      3 C.      6 D.      9 E.       15   Correct Answer: E QUESTION 42 Refer to the exhibit. The ports that are shown are the only active ports on the switch. The MAC address table is Read more [...]

Continue Reading

100-101 Real Exam (October)

[Free] New Updated (October) Cisco 100-101 Real Exam 21-30

By on
Ensurepass  QUESTION 21 A workstation has just resolved a browser URL to the IP address of a server. What protocol will the workstation now use to determine the destination MAC address to be placed into frames directed toward the server?   A.      HTTP B.      DNS C.      DHCP D.      RARP E.       ARP   Correct Answer: E QUESTION 22 Refer to the exhibit. Read more [...]

Continue Reading