350-080 Real Tests (Spring 2015)

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 241-250

By on April 26, 2015
Ensurepass  QUESTION 241 Refer to the exhibit. Which option is valid for connecting the fabric interconnect to the I/O module?   A. A, B, C, and D are valid. B. A and B are valid. C. A, B, and D are valid. D. Only A is valid.   Correct Answer: B     QUESTION 242 Refer to the exhibit. Assume that the Cisco UCS 6200 Series Fabric Interconnects are equipped with 16 port expansion modules. What is the impact of the last command in the exhibit?     Read more [...]

Continue Reading

350-080 Real Tests (Spring 2015)

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 221-230

By on
Ensurepass="cursor: auto; margin: 0cm 0cm 0pt; line-height: normal; text-autospace: ; mso-layout-grid-align: none" align="left">  QUESTION 221 Refer to the exhibit. Which two options describe possible causes of the failure shown in the exhibit? (Choose two.)     A. Two switches have the same zone set name, but different zone names and different zone members. B. Two switches have the same zone set name and zone name, but different zone members. C. The zoneset export interface Read more [...]

Continue Reading

350-080 Real Tests (Spring 2015)

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 231-240

By on
Ensurepass  QUESTION 231 Which two methods can be used in communications between the Cisco Nexus 1000V VEM and the VSM? (Choose two.)   A. routed TCP traffic using HTTPS B. routed UDP traffic using port 4785 C. routed UDP traffic using port 7845 D. Layer 2 direct traffic using MAC addresses E. Layer 2 broadcast traffic F. routed TCP traffic using port 4785 G. routed TCP traffic using port 7845   Correct Answer: BD     QUESTION 232 Refer to the exhibit. Read more [...]

Continue Reading

350-080 Real Tests (Spring 2015)

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 201-210

By on
Ensurepass="cursor: auto; margin: 0cm 0cm 0pt; line-height: normal; text-autospace: ; mso-layout-grid-align: none" align="left">  QUESTION 201 Which PIM mode is supported in Cisco NX-OS?   A. sparse mode B. dense mode C. sparse-dense mode D. dense-sparse mode   Correct Answer: A     QUESTION 202 Refer to the exhibit. Which configuration command (or commands) will produce the output that is shown in the exhibit?     A. no feature igmp B. no Read more [...]

Continue Reading

350-080 Real Tests (Spring 2015)

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 211-220

By on
Ensurepass="cursor: auto; margin: 0cm 0cm 0pt; line-height: normal; text-autospace: ; mso-layout-grid-align: none" align="left">  QUESTION 211 Which two types of multicast trees are supported by Cisco NX-OS? (Choose two.)   A. private trees B. shared trees C. unicast trees D. anycast trees E. unidirectional trees F. bidirectional trees   Correct Answer: BF     QUESTION 212 Refer to the exhibit. The engineer needs to check if keepalive messages between Read more [...]

Continue Reading

350-080 Real Tests (Spring 2015)

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 181-190

By on
Ensurepass    QUESTION 181 How many concurrent GUI logins are possible per user account on Cisco UCS Manager?   A. 128 B. 96 C. 64 D. 32   Correct Answer: D     QUESTION 182 ACE can check the health of servers and server farms by configuring health probes (sometimes referred to as keepalives). There are several types of probes. Which three options are valid ACE probes? (Choose three.)   A. TCP B. ICMP C. HTTP D. IPsec   Correct Answer: Read more [...]

Continue Reading

350-080 Real Tests (Spring 2015)

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 191-200

By on
Ensurepass="cursor: auto; margin: 0cm 0cm 0pt; line-height: normal; text-autospace: ; mso-layout-grid-align: none" align="left">  QUESTION 191 What are two benefits of a FabricPath network? (Choose two.)   A. Simplicity of configuration B. Automatic OSPF routing C. Scalability D. Dynamic link selection E. Spanning tree loop prioritization.   Correct Answer: AC         QUESTION 192 Refer to the exhibit. Which of these technologies is illustrated Read more [...]

Continue Reading

350-080 Real Tests (Spring 2015)

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 161-170

By on
Ensurepass  QUESTION 161 Refer to the exhibit. According to the equipment tab in Cisco UCS Manager, which is true?     A. A is an uplink port, B is a fabric port, C is a server port, D is a backplane port, E is a DCE interface, and F is a vNIC B. A is an uplink port, B is a server port, C is a fabric port, D is a backplane port, E is a DCE interface, and F is a vNIC C. A is an uplink port, B is a fabric port, C is a backplane port, D is a server port, E is a DCE interface, Read more [...]

Continue Reading

350-080 Real Tests (Spring 2015)

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 171-180

By on
Ensurepass  QUESTION 171 When testing ICMP access to a functional load-balancing ACE VIP, it fails. What is the reason of this problem? (Choose two.)   A. The interface is shut down B. An access list is denying ICMP C. Routing is not configured properly D. vip icmp-reply is inactive   Correct Answer: BD     QUESTION 172 Which GSS "source access list" is used to allow access to GSS by clients when GSS is being used as the DNS?   A. Client IP B. Proxy Read more [...]

Continue Reading

350-080 Real Tests (Spring 2015)

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 151-160

By on
Ensurepass  QUESTION 151 What would be the cause for the following fault in UCS Manager?   "ether VIF x / xxx down, reason: ENM source pinning failed"   A. The associated VLANs of a vNIC are not found on an uplink. B. Overlapping VLAN IDs exist on upstream disjoint networks. C. The vNIC was not configured for fabric failover. D. The vNIC is pinned to the wrong fabric. E. Overlapping VSAN IDs exist on upstream SAN switches. F. The vHBA was not configured for failover. Read more [...]

Continue Reading

350-080 Real Tests (Spring 2015)

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 141-150

By on
Ensurepass  QUESTION 141 Given the following output:   san-port-channel 12 is up   Hardware is Fibre Channel   Port WWN is 24:0c:00:0d:ec:d3:5c:00   Admin port mode is NP, trunk mode is on   Port mode is NP   Port vsan is 1   Speed is 8 Gbps   Member[1] : fc2/3   Member[2] : fc2/4   What does "Speed is 8 Gbps" indicate?   A. The speed of the slowest interface in the port channel B. The combined speed of all interfaces configured Read more [...]

Continue Reading

350-080 Real Tests (Spring 2015)

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 131-140

By on
Ensurepass  QUESTION 131 When creating a QoS policy dialog box in Cisco UCSM, which four fields can be modified? (Choose four.)   A. name B. best-effort C. burst D. rate E. host control   Correct Answer: ACDE     QUESTION 132 Which policy determines what happens to local data and to the BIOS settings on a server during the discovery process and when the server is disassociated from a service profile?   A. boot policy and BIOS policy B. disk scrub Read more [...]

Continue Reading

350-080 Real Tests (Spring 2015)

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 111-120

By on
Ensurepass="cursor: auto; margin: 0cm 0cm 0pt; line-height: normal; text-autospace: ; mso-layout-grid-align: none" align="left">  QUESTION 111 What are the four vPath packet flow steps? (Choose four.)   A. perform flow lookups B. intercept packets on service enabled ports C. run packets through the vPath flow manager D. classify the packets E. flow manager emits an action for the packets F. enforce the action determined by the flow manager   Correct Answer: BCEF Read more [...]

Continue Reading

350-080 Real Tests (Spring 2015)

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 121-130

By on
Ensurepass  QUESTION 121 Why is a Cisco UCS B250 server unable to support 16-GB DIMMs?   A. Dual-rank DIMMs are not supported. B. 16-GB DIMMs are too slow. C. The largest DIMM an Intel 55xx or 56xx CPU can address is 32 GB. D. The memory bus would be too long. E. The blade would run too hot.   Correct Answer: C     QUESTION 122 On a Cisco UCS B250 M2 server that is fully populated with 1333-MHz memory and an E5640 CPU, what is the fastest speed the memory Read more [...]

Continue Reading

350-080 Real Tests (Spring 2015)

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 101-110

By on
Ensurepass  QUESTION 101 A VSM is actually a virtual machine that requires how many vNICs for functioning?   A. 0 B. 1 C. 2 D. 3 E. 4   Correct Answer: D       QUESTION 102 When configuring vPC-HM CDP with multiple links to the same switch, are port-channels required?     A. Each link between the upstream switch and the VEM is an individual subgroup. B. Connections that go to the same upstream switch must be configured with the command Read more [...]

Continue Reading

350-080 Real Tests (Spring 2015)

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 91-100

By on
Ensurepass  QUESTION 91 Which command is used to determine if a host has logged in to the Fibre Channel fabric?   A. show flogi database B. show system fc login C. show npv flogi-table D. show npv fcns database E. show interface vfc X flogi F. show interface flogi   Correct Answer: A     QUESTION 92 Traffic drop for FCoE is experienced across a Nexus 5548 switch. What is a possible cause?   A. Server's CNA does not support DCBX and PFC TLV was Read more [...]

Continue Reading

350-080 Real Tests (Spring 2015)

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 61-70

By on
Ensurepass  QUESTION 61 Which three statements best describe multicast operation on Cisco Nexus switches in a data center? (Choose three.)   A. Cisco NX-OS Software does not support PIM dense mode. B. The command ip multicast-routing must be enabled in Cisco NX-OS Software before any multicast configuration is possible on the switch. C. PIM CLI configuration and verification commands are not available until you enable the PIM feature with the feature pim command. D. Cisco Read more [...]

Continue Reading

350-080 Real Tests (Spring 2015)

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 31-40

By on
Ensurepass  QUESTION 31 After configuring FabricPath, the following appears in the syslog:   %STP-2-L2GW_BACKBONE_BLOCK: L2 Gateway Backbone port inconsistency blocking port port-channel100 on VLAN0010.   What is the cause of this message?   A. STP must be disabled; message indicates that STP is enabled. B. STP is misconfigured; root guard must be disabled. C. An inferior BPDU is received on a Cisco FabricPath edge port. D. A superior BPDU is received on a Cisco Read more [...]

Continue Reading

350-080 Real Tests (Spring 2015)

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 41-50

By on
Ensurepass  QUESTION 41 What is the benefit of using Anycast RP via RFC 4610 for IP multicast RP redundancy?   A. Improves convergence of the multicast network due to enhanced RPF checks B. Simplifies the number of control plane protocols over other RP redundancy methods C. Eliminates the use of Protocol Independent Multicast (PIM) in the topology D. Increases the administrative distances in Multicast Source Discovery Protocol (MSDP) configuration   Correct Answer: B Read more [...]

Continue Reading

350-080 Real Tests (Spring 2015)

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 51-60

By on
Ensurepass  QUESTION 51 Which statement describes the XML management interface in Cisco NX-OS Software?   A. The following XML-based NETCONF operations are supported in NX-OS SoftwarE. close-session, copy-config, delete-config, and edit-config. B. The following XML-based NETCONF operations are supported in NX-OS SoftwarE. close-session, copy-config, edit-config, and kill-session. C. NX-OS Software supports up to a maximum of 16 concurrent XML sessions. D. Only show commands Read more [...]

Continue Reading

350-080 Real Tests (Spring 2015)

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 21-30

By on
Ensurepass="cursor: auto; margin: 0cm 0cm 0pt; line-height: normal; text-autospace: ; mso-layout-grid-align: none" align="left">  QUESTION 21 The vPC peer-gateway capability allows a vPC switch to act as the active gateway for packets that are addressed to the router MAC address of the vPC peer. This feature enables local forwarding of such packets without the need to cross the vPC peer link. Which statements are true about the vPC peer-gateway? (Choose two.)   A. The vPC peer-gateway Read more [...]

Continue Reading

350-080 Real Tests (Spring 2015)

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 11-20

By on
Ensurepass  QUESTION 11 Which three flow-control port states lead to enabled link flow control? (Choose three.)   A. Receive port: Enabled, Transmit port: Enabled B. Receive port: Enabled, Transmit port: Desired C. Receive port: Enabled, Transmit port: Disabled D. Receive port: Disabled, Transmit port: Desired E. Receive port: Desired, Transmit port: Desired   Correct Answer: ABE     QUESTION 12 In a configuration with redundant supervisors, how many IP addresses Read more [...]

Continue Reading

350-080 Real Tests (Spring 2015)

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 1-10

By on
Ensurepass QUESTION 1 FabricPath brings the benefits of routing protocols to layer 2 network Ethernet environments. What are the advantages of using FabricPath technology? (Choose three.)   A. FabricPath provides MAC address scalability with conversational learning B. Loop mitigation with TTL in the frame field C. STPl independence D. 10 Gbps bandwidth E. Layer 2 extensions between data centers   Correct Answer: ABC     QUESTION 2 A network administrator has installed Read more [...]

Continue Reading