Latest Certified Success Dumps Download

CISCO, MICROSOFT, COMPTIA, HP, IBM, ORACLE, VMWARE
300-180 Real Tests (May 2017)

[Free] 2017(May) Ensurepass Testinsides Cisco 300-180 Real Tests 11-20

May 3, 2017

Ensurepass
2017 May Cisco Official New Released 300-180 Q&As
100% Free Download! 100% Pass Guaranteed!
http://www.ensurepass.com/300-180.html

Troubleshooting Cisco Data Center Infrastructure (DCIT) v6.0

QUESTION 11

How can you set a Cisco UCS C-Series Server to export tech-support data for TAC to an external file server?

 

A.

CIMC to a TFTP server

B.

CIMC to an RCP server

C.

FSM to a TFTP server

D.

FSM to an RCP server

 

Correct Answer: A

 

 

QUESTION 12

Which piece of information does the FSM provide?

 

A.

the current task and status

B.

a collection of blade statistics

C.

the last user to access the resource

D.

a list of faults currently suppressed by the Cisco UCS Manager

 

Correct Answer: A

 

 

QUESTION 13

Refer to exhibit. A Cisco UCS admin is troubleshooting an issue with a vNIC not coming up on a blade. When looking at the CLI of the “Fabric Interconnect”,the admin runs this command to view the status of the interface. Which option describes a possible reason why the interface is stuck in an “initializing” state?

 

clip_image002

 

A.

The service profile is not applied to a blade.

B.

The VLANs defined on the vNIC are not defined on a matching uplink port.

C.

The uplink port is down.

D.

The QoS policy on the vNIC is invalid.

E.

The MTU on the vNIC is higher than the MTU configured in the QoS system class.

 

Correct Answer: C

 

 

QUESTION 14

Which two statements about configuring a traffic monitoring session are true? (Choose two.)

 

A.

You can set a local VM as a traffic destination.

B.

You can have up to two active monitoring sessions simultaneously.

C.

An unlimited number of monitoring session can be stored.

D.

A newly created monitoring session is enabled by default.

E.

A destination port can also be a source port within the same session.

F.

A vHBA can be a source for either an Ethernet or Fibre Channel monitoring session, but not both.

 

Correct Answer: BF

 

 

 

QUESTION 15

Which command sequence in the Cisco UCS C-Series rack server CLI sends tech support data to a TFTP server?

 

A.

ucs-c250 / # scope cimc

ucs-c250 /cimc # scope tech-support

ucs-c250 /cimc/tech-support # set path default.tar.gz

ucs-c250 /cimc/tech-support *# set tftp-ip 192.168.70.45

ucs-c250 /cimc/tech-support *# commit

B.

ucs-c250 / # scope system

ucs-c250 /system # scope tech-support

ucs-c250 /system/tech-support # set path default.tar.gz

ucs-c250 /system/tech-support *# set tftp-ip 192.168.70.45

ucs-c250 /system/tech-support *# commit

C.

ucs-c250 / # scope support

ucs-c250 /support # scope tech-support

ucs-c250 /support/tech-support # set path default.tar.gz

ucs-c250 /support/tech-support *# set tftp-ip 192.168.70.45

ucs-c250 /support/tech-support *# commit

D.

ucs-c250 / # scope fault

ucs-c250 /fault # scope tech-support

ucs-c250 /fault/tech-support # set path default.tar.gz

ucs-c250 /fault/tech-support *# set tftp-ip 192.168.70.45

ucs-c250 /fault/tech-support *# commit

 

Correct Answer: A

 

 

QUESTION 16

Which CLI command should you use to promote the local fabric interconnect to primary?

 

A.

cluster primary force

B.

cluster failover primary

C.

cluster force primary

D.

cluster failover

E.

failover

 

Correct Answer: C

 

 

QUESTION 17

HOTSPOT

clip_image003

clip_image004

clip_image006

clip_image008

clip_image010

clip_image012

clip_image013

 

Correct Answer:

clip_image014

 

 

QUESTION 18

Refer to the exhibit. What can you deduce from this configuration?

 

clip_image015

 

A.

This configuration is not taken from a fabric interconnect.

B.

This configuration refers to an uplink port on the fabric interconnect.

C.

Fabric link Eth1/1/3 is pinned to uplink port Eth1/1.

D.

A server in slot 3 is pinned to link 1 between IOM and the fabric interconnect.

 

Correct Answer: D

 

 

QUESTION 19

During a password recovery of a Cisco UCS system in a cluster configuration, what happens to blade traffic?

 

A.

There is no interruption to traffic, as the fabrics go down one at a time.

B.

Traffic stops flowing until the process is complete.

C.

There is no interruption to traffic because both fabrics stay up the whole time.

D.

Traffic will continue to flow, but at a limited rate until the process is complete.

 

Correct Answer: B

 

 

QUESTION 20

Which two options are Cisco UCS default user roles? (Choose two.)

 

A.

Administrator

B.

Server Equipment Administrator

C.

FCoE Administrator

D.

Server Resource Administrator

E.

LAN Administrator

 

Correct Answer: AB

100% Free Download!
—Download Free Demo:300-180 Demo PDF
100% Pass Guaranteed!
Download 2017 Ensurepass 300-180 Full Exam PDF and VCE Q&As:291
—Get 10% off your purchase! Copy it:TJDN-947R-9CCD [2017.05.01-2017.05.31]

Ensurepass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF + VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Ensurepass IT Certification PDF and VCE