Latest Certified Success Dumps Download

CISCO, MICROSOFT, COMPTIA, HP, IBM, ORACLE, VMWARE
300-180 Real Tests (May 2017)

[Free] 2017(May) Ensurepass Testinsides Cisco 300-180 Real Tests 61-70

May 3, 2017

Ensurepass
2017 May Cisco Official New Released 300-180 Q&As
100% Free Download! 100% Pass Guaranteed!
http://www.ensurepass.com/300-180.html

Troubleshooting Cisco Data Center Infrastructure (DCIT) v6.0

QUESTION 61

You are troubleshooting a remote Cisco UCS environment that has Cisco UCS 2208 I/O Modules. Some of the links from the IOMs to the UCS Fabric Interconnect fail to work as expected. You check whether the SFP is in place and the state of the IOM ports. Which command do you use to view the MAC and PHY status to determine whether the SFP is detected in the IOM?

 

A.

show platform software redwood oper

B.

show platform software woodsideoper

C.

show platform software woodsidests

D.

show platform software redwood post

 

Correct Answer: B

 

 

QUESTION 62

clip_image001

clip_image002

clip_image003

clip_image004

 

What is the reason that no C-Series servers can access Fibre Channel storage from this Cisco Nexus 554SUP switch?

 

A.

Zoning mode mis-match with the MDS 9124

B.

There are no active Fibre Channel interfaces

C.

VSAN mis-match on Fibre Channel interfaces

D.

None of the virtual fibre channel interfaces are configured

 

Correct Answer: C

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

QUESTION 63

HOTSPOT

clip_image005

clip_image006

clip_image008

clip_image009

clip_image011

clip_image013

clip_image014

 

Correct Answer:

clip_image015

 

 

QUESTION 64

A customer calls in a trouble ticket and explains that after a power failure, the UPS was discovered to be defective and the Cisco UCS C210 M2 server running Windows 2008 R2 went down without proper shutdown. After restarting the server, you discover the RAID 5 array rebuilding parity. Which write-cache settings on the LSI MegaRAID 9260-4i controller explain this symptom?

 

A.

write back

B.

write through

C.

write back with BBU

D.

no write cache

E.

no hot spare

 

Correct Answer: A

 

 

QUESTION 65

A customer is configuring VSANs in a Cisco UCS domain. After configuring the VSANs 3840, 3841, and 3842 in FC end-host mode, the customer sees that these VSANs are not operational and that Cisco UCS Manager is raising faults. What is the cause of this problem?

 

A.

VSANs 3840, 3841, and 3842 should be in the allowed list on the trunk to clear the fault.

B.

VSANs 3840 to 4079 cannot be used in Fibre Channel end-host mode in a Cisco UCS domain.

C.

The fabric interconnect needs to be configured in switching mode and the VSANs need to be allowed on the trunk.

D.

Use the UCS CLI to clear the fault on the VSAN trunk to forward the VSANs with faults.

 

Correct Answer: B

 

 

QUESTION 66

HOTSPOT

clip_image016

clip_image017

clip_image019

clip_image021

clip_image023

clip_image025

clip_image026

 

Correct Answer:

clip_image027

 

 

QUESTION 67

clip_image028

clip_image029

clip_image030

clip_image031

clip_image032

clip_image033

clip_image034

 

Refer to Exhibit 5. Which of the following is true regarding password recovery for the Cisco IMC GUI interface?

 

A.

From the KVM Console, press F12 during POST to reset the credentials to admin/password

B.

Type RECOVER into the Username field, and then type SYSTEM in the Password field to enter recovery mode

C.

Refer to the model-specific Cisco UCS C-Series Hardware guide to learn the location of the recovery jumper on the server motherboard

D.

Enter the Cisco IMC BIOS to reset the GUI password

 

Correct Answer: D

 

 

QUESTION 68

What is the recommended procedure to update Cisco UCS C-Series rack-mount server firmware?

 

A.

Launch the Cisco UCS Firmware Update Utility from virtual media.

B.

Launch the Cisco UCS Host Update Utility from virtual media.

C.

Launch the Cisco UCS Server Update Utility from virtual media.

D.

Launch the Cisco UCS CIMC Update Utility from virtual media.

 

Correct Answer: B

 

 

QUESTION 69

Which is the cause of the disk being unavailable, during the installation of ESXi on a C- Series UCS server the logical 4TB disk for the installation client?

 

A.

The logical drive was created using the Embedded Software Raid Controller

B.

VMware requires the LSI Drivers to be installed first

C.

The logical drive is in RAID0

D.

The logical drive is not available as RAID has not completed building

 

Correct Answer: A

 

 

QUESTION 70

Which three Cisco UCS server components can be upgraded via a host firmware package? (Choose three.)

 

A.

BIOS

B.

Cisco UCS Manager

C.

I/O module

D.

Cisco IMC

E.

fabric interconnect

F.

adapter

G.

board controller

 

Correct Answer: AFG

100% Free Download!
—Download Free Demo:300-180 Demo PDF
100% Pass Guaranteed!
Download 2017 Ensurepass 300-180 Full Exam PDF and VCE Q&As:291
—Get 10% off your purchase! Copy it:TJDN-947R-9CCD [2017.05.01-2017.05.31]

Ensurepass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF + VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Ensurepass IT Certification PDF and VCE