Latest Certified Success Dumps Download

CISCO, MICROSOFT, COMPTIA, HP, IBM, ORACLE, VMWARE
C2180-410 Latest Exam (Nov 2017)

[Free] 2017(Nov) EnsurePass Dumpsleader IBM C2180-410 Dumps with VCE and PDF 31-40

November 22, 2017

EnsurePass
2017 Nov IBM Official New Released C2180-410
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/C2180-410.html

IBM MQ V8.0, System Administration

Question No: 31

An existing JMS Client application is to make use of the Automatic Client Reconnect feature without changing the application code.

Where must the system administrator activate the automatic reconnect option for the JMS client application?

  1. Client Pre-Connect Exit

  2. DefRecon parameter of the mqclient.ini Channels stanza

  3. CLIENTRECONNECTOPTIONS property of the ConnectionFactory

  4. Default Reconnection parameter within the Client Channel Definition Table (CCDT)

Answer: C

Reference:

https://www- 01.ibm.com/support/knowledgecenter/SSFKSJ_8.0.0/com.ibm.mq.dev.doc/q119450_.htm

Question No: 32

A financial company is having a problem with IBM MQ on their development system. The queue manager is not down, but the new application keeps failing and MQ generates FDC files. This problem is significantly affecting the business as they could miss the project deadlines.

The system administrator needs to open a Service Request (SR) to report the problem to IBM.

What should be the severity of the SR raised by the system administrator?

  1. 1

  2. 2

  3. 3

  4. 4

Answer: B

Question No: 33

An MQI Client application, which is run from different client machines, wants to benefit from the read ahead performance advantages for non-persistent messages.

While the client programs are changed on some machines to specify the MQOO_READ_AHEAD option, some other machines have to run the existing client application code without that option for a certain period of time.

What must the system administrator configure to support the coexistence of the two different versions of the client application?

  1. SHARECNV(0) on the SVRCONN channel and DEFREADA(YES) for the queues

  2. SHARECNV(gt;0) on the SVRCONN channel and DEFREADA(NO) for the queues

  3. SHARECNV(gt;0) on the SVRCONN channel and DEFREADA(YES) for the queues

  4. SHARECNV(gt;1) on the SVRCONN channel and DEFREADA(ENABLED) for the queues

Answer: A

Reference: ftp://public.dhe.ibm.com/software/integration/support/supportpacs/individual/mp1h.pdf

Question No: 34

A system administrator needs to check the settings of a channel definition table on a client system that has only MQ client software installed.

How can the system administrator check the local channel definition table on the client system?

  1. Export the MQCHLTAB environment variable.

  2. Use a text editor to view the AMQCLCHL.TAB file.

  3. Use MQ Explorer to view the client connection settings.

  4. Enter runmqsc -n and use the DIS CHL(CLNTCONN) command.

Answer: A

Reference:

http://www- 01.ibm.com/support/knowledgecenter/SSFKSJ_8.0.0/com.ibm.mq.con.doc/q016960_.htm

Question No: 35

There is a requirement to create a development queue manager on AIX with authorization checks disabled.

How can a system administrator do this?

  1. Set environment variable MQSNOAUT=yes before creating the queue manager.

  2. Set SecurityPolicy=none on Service stanza in qm.ini file then start the queue manager.

  3. Start the queue manager with the MQSNOAUT environment variable set to 鈥淵ES鈥?

  4. Create the queue manager and then run thesetmqautcommand with the-remove allattribute.

Answer: A

Reference:

http://www- 01.ibm.com/support/knowledgecenter/nl/en/SSFKSJ_7.5.0/com.ibm.mq.con.doc/q017030_. htm

Question No: 36

A system administrator has set up the MQ infrastructure in a company as shown below: There are three queue managers QMGR1, QMGR2 and QMGR3.

QMGR2 and QMGR3 are part of a cluster MYCLUS.

QMGR1 and QMGR2 are connected using sender-receiver channels using QMGR2 as the transmission queue.

As part of a new requirement, the system administrator creates the following definitions QMGR1

defqr(MQ8QM.REMOTE) RNAME (MQ8QM.LOCAL) RQMNAME (MQ8QM) XMITQ QMGR2:

defqr (MQ8QM) RQMNAME (QMGR3)

defqlocal (MQ8QM.NEW) QMGR3:

defqalias (MQ8QM.LOCAL) target (MQ8QM.NEW) defqlocal (MQ8QM.NEW)

The system administrator tests the connectivity by putting a message on MQ8QM.REMOTE on QMGR1 using IBM WebSphere MQ Explorer.

Where does the message end up?

  1. MQ8QM.NEW on QMGR2

  2. MQ8QM.NEW on QMGR3

  3. Dead-letter queue on QMGR2

  4. Dead-letter queue on QMGR3

Answer: C

Question No: 37

In a network topology, a queue manager will have multiple clients connecting to a single server-connection channel by using a TCP client-connection channel. The channel must be configured so that an idle client does not stay connected.

To support this topology, the system administrator should:

  1. set the KAINT attribute on the client-connection channel.

  2. set the MRTMR attribute on the client-connection channel.

  3. set the HBINT attribute on the server-connection channel.

  4. set the DISCINT attribute on the server-connection channel.

Answer: C

Reference:

http://www- 01.ibm.com/support/knowledgecenter/SSFKSJ_7.1.0/com.ibm.mq.doc/cs70190_.htm

Question No: 38

A client application receives en error MQRC_Q_FULL indicating that the queue is full. The administrator sets the queue properties for queue depth max events (QDPMAXEV) to ENABLED.

Which setting must the system administrator configure at the queue manager level and which queue does the system administrator need to monitor for event messages?

  1. Inhibit Events set to Enabled

    Monitor the SYSTEM.ADMIN.INHIBIT.EVENT queue

  2. Remote Events set to Enabled

    Monitor the SYSTEM.ADMIN.QMGR.EVENT queue

  3. Performance Events set to Enabled

    Monitor the SYSTEM.ADMIN.PERFM.EVENT queue

  4. Configuration Events set to Enabled

Monitor the SYSTEM.DEFAULT.MODEL.QUEUE queue

Answer: C

Question No: 39

A channel connection between two queue managers, QM01 and QM2, on different machines is to be secured by mutual SSL/TLS authentication.

After a key repository and a self-signed certificate have been created for both queue managers, what does the system administrator have to do next?

  1. Specify the respective label of the paper queue manager’s certificate as the CERTLABL attribute of the local queue manager

  2. Create a certificate request, on the QM01 machine for the QM02 certificate, and on the QM02 machine for the QM01 certificate.

  3. Transfer the QM01 personal certificate to the QM02 machine and the QM02 personal certificate to the QM01 machine.

  4. Transfer the public part of the QM01 certificate to the QM02 machine and the public part of the QM02 certificate to the QM01 machine, then add the partner certificates to the key repository for each queue manager.

Answer: A

Reference:

http://www-01.ibm.com/support/docview.wss?uid=swg21578742

Question No: 40

IBM MQ will be installed into a multi-instance queue manager environment. After defining the shared file system, the system administrator created the queue manager QMA on the first server.

How can the system administrator create the second queue manager in order for it to be the standby instance?

  1. Change the STANDBY option in the queue manager object to PERMITTED.

  2. Use dspmqinf on the first server and addmqinf on the second server.

  3. Use crtmqm with the option that allows the queue manager to be created as the standby.

  4. Use crtmqm to create the queue manager on the second server and copy /var/mqm from the first server.

Answer: A

Reference:

https://www- 01.ibm.com/support/knowledgecenter/SSFKSJ_8.0.0/com.ibm.mq.ref.adm.doc/q083320_.h tm

100% Free Download!
Download Free Demo:C2180-410 Demo PDF
100% Pass Guaranteed!
Download 2017 EnsurePass C2180-410 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 EnsurePass IT Certification PDF and VCE