400-151 Latest Exam (Aug 2018)

[Free] 2018(Aug) Ensurepass Cisco 400-151 Dumps with VCE and PDF 191-200

August 11, 2018

Ensurepass.com : Ensure you pass the IT Exams
2018 Aug Cisco Official New Released 400-151
100% Free Download! 100% Pass Guaranteed!

CCIE Data Center (v2.0)

Question No: 191 – (Topic 2)

Which statement about soft pinning is incorrect?

  1. If no uplink Ethernet port channel is configured with all VLANs on the vNIC.Cisco UCS Manager drops the traffic for all of the VLANs on the vNIC.

  2. When the VLAN validation fails, a VLAN mismatch fault with a severity of warning appears.

  3. It is the default behavior Cisco UCS.

  4. Cisco UCS Manager pins the vNIC to an uplink Ethernet port or port channel according to VLAN membership criteria.

Answer: B

Question No: 192 – (Topic 2)

Which three prerequisites must be created to enable Cisco UCS authentications via LDAP? (Choose 3)

  1. LDAP provider group

  2. remotely authenticated user

  3. LDAP provider

  4. authentication domain

  5. LDAP group map

  6. LDAP server

Answer: A,C,E

Question No: 193 – (Topic 2)

The Cisco nexus 1000V Switch uses a multihypervisor licensing approach. Which three statements are true? (Choose three.)

  1. The Essentials edition comes with a 180-day trial for the Advanced edition.

  2. An advanced edition license is required for each CPU socket on each VEM.

  3. The VXLAN gateway is included in the Essential edition license.

  4. The Cisco Nexus 1000 v switch supports Essential and Advanced license editions.

  5. Only the Advance edition license is supported with multihypervisor.

  6. You can migrate the license from a Cisco Nexus 1000V Switch for KVM to a Cisco Nexus 1000V Switch for VMware.

Answer: B,D,F Explanation:


_2_2/license/b_Cisco_N1KV_Universal_License_Config/b_Cisco_N1KV_License_Config_ 521SK111_chapter_01.html

Question No: 194 – (Topic 2)

Refer to the exhibit Server 1 and server 2 are on the same VLAN but cannot reach each other. Which option describes the reason?

Ensurepass 2018 PDF and VCE

  1. Interface VALN (SVI) must be configured for this VLAN.

  2. VLAN is not allowed on the peer link.

  3. VLAN is not on FabricPath mode.

  4. Type2 inconsistency prevents the communication.

Answer: C

Question No: 195 – (Topic 2)

Which three options are key characteristics of the data center core layer in a three-tier architecture? (Choose three.)

  1. Provides scalability

  2. Used to enforce network security

  3. Performs Qos marking

  4. Provides connectivity to distribution layer

  5. Performs policing

  6. High availability

Answer: A,D,F Explanation:

Ref:http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/DC_Infra2_5/D CInfra_1.html

Question No: 196 – (Topic 2)

Which OSPF feature groups LSAs with similar link-state refresh times to allow OSPFv2 to pack multiple LSAs into an OSPFv2 update message?

  1. LSA group pacing

  2. LSA compression

  3. SPF optimization

  4. LSA throttling

Answer: A

Question No: 197 – (Topic 2)

Which two statements about a 鈥淰irtual PortChannel graceful consistent check鈥?are true?

  1. Graceful consistency check is enabled by default.

  2. When graceful consistency check is enabled, only the links on the secondary peer device are suspended.

  3. Graceful consistency check is disabled by default, so to enable this feature, use graceful consistency-check command under VPC domain configuration mode.

  4. When graceful consistency check is enabled, only the inconsistent VLANs on the secondary peer device are suspended.

Answer: A,B

Question No: 198 – (Topic 2)

Which command sends a test call Home Invertor message to start the registration process

  1. test callhome inventory

  2. callhome inventory test

  3. test inventory callhome

  4. callhome test inventory

Answer: D

Question No: 199 – (Topic 2)

Refer to the exhibit.

Ensurepass 2018 PDF and VCE

The administrator has been provided with this topology, but has not been provided with the IP address of storage switch and has been asked zoning. Which two CLI commands can be used to determine the management addresses of the storage switches? (Choose two)

  1. show npv status

  2. show fcns database

  3. show fcdomain status

  4. show fcdomain domain-list

  5. show fcdomain statistics

  6. show cfs internal ethernet-peer

  7. show cfs peers

  8. show npv internal info

Answer: G,H Explanation: Ref:

http://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_2_x/san- os/configuration/guide/cfs.html

Ref: http://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_1_x/1_0_2/san- os/configuration/guide/MgngStorDevc.html

Question No: 200 – (Topic 2)

Which option lists the main components of the Cisco Nexus 1000V Series Switch?

  1. the virtual supervisory module and virtual Ethernet module

  2. VMware virtual switch and virtual hosts

  3. the virtual chassis and the virtual line cards

  4. the Cisco Nexus ,1010 and 1,00 Series virtual appliances

Answer: A Explanation:



100% Ensurepass Free Download!
400-151 PDF
100% Ensurepass Free Guaranteed!
400-151 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No